Roasted Maple, Carbon Rods and Stainless Frets: Inside a McGrath Neck

Handmade McGrath P bass in Coffee with a roasted flame maple neck

Body wood and paint get most of the attention, but the neck is the part of a bass you actually touch the whole time you play. It decides how the bass feels, how well it holds its setup, and how long it goes before it needs fretwork. That is why every McGrath bass gets the same three neck specs as standard: a roasted flame maple neck, dual carbon fiber reinforcement and stainless steel frets. Here is what each one does.

Roasted flame maple

Roasted (sometimes called torrefied) maple is maple that has been baked in a low-oxygen kiln to drive out moisture and resins. Two things happen. The wood takes on a warm caramel color all the way through, and it becomes less reactive to changes in humidity.

That second part is the one players notice. A neck that moves less with the seasons holds its relief and action better, so your bass feels the same in a damp club as it did in a dry living room. Roasted maple also has a smooth, slightly dry feel under the hand that a lot of players love. We use flame maple, so you get that stability with a figured look on top.

Dual carbon fiber reinforcement

Bass strings put a lot of tension on a neck, especially on a 5-string with a low B. Inside every McGrath neck, alongside the truss rod, sit two carbon fiber rods. Carbon fiber is very stiff and light, so it resists the neck bending or twisting without adding noticeable weight.

The result is a neck that stays true regardless of the environment, which is exactly how we described the setup on our first left-handed bass, the Thunderhorse IV in Black Sands. Your truss rod still does the fine-tuning; the carbon rods just mean it has less work to do.

Stainless steel frets

Most basses use nickel-silver frets. They work fine, but they are relatively soft, so roundwound strings slowly wear grooves into them and eventually you need a fret level or a refret. Stainless steel is much harder, so the frets wear far more slowly and stay level and polished for years.

Stainless frets also feel slick for slides and glisses, and they do not tarnish. Some players hear a touch more sparkle from them too. On a hand-built bass you plan to keep for a long time, they are one of the best long-term upgrades you can make.

How it all adds up

  • Stability: roasted maple and carbon reinforcement both help your setup hold through seasons and travel.
  • Feel: a smooth roasted neck and slick stainless frets make the bass easy to move around on.
  • Longevity: stainless frets mean far fewer trips to the tech for fretwork.

Even with a stable neck, it is worth checking your setup now and then. Our guide on how to check your bass action and neck relief walks through it.

Common questions

Does roasted maple sound different?
Neck wood has a smaller effect on tone than pickups and electronics. Most players choose roasted maple for its stability and feel first.

Is a fretless neck built the same way?
Fretless is available on request. Our fretless guide covers what changes.

Do these specs cost extra?
No. A roasted flame maple neck, dual carbon fiber reinforcement and stainless steel frets are standard on every custom McGrath bass.

Build yours

Pick your model, strings, scale, pickups and a hand-painted finish by Madelyn in our Bass Builder. Pricing starts at $1,999, a 25% deposit reserves your build, and lead time is currently about 4 months. Every build ships in a McGrath x Protec hybrid case. Want one sooner? Browse our in-stock instruments.

0 comments

Leave a comment